YS-D2

ysd2f-up
YS-D2 Strobe Guide Number (ISO 100/m) (land) : 32, 24 (with Diffuser 100 attached),                                                        20 (with Diffuser 120 attached) Beam Angle : 80°x80° (without Diffuser),                       100°x100°(Diffuser ...Read more
  • Description
  • Specifications

YS-D2 Strobe

Guide Number (ISO 100/m) (land) : 32, 24 (with Diffuser 100 attached),

                                                       20 (with Diffuser 120 attached)

Beam Angle : 80°x80° (without Diffuser),

                      100°x100°(Diffuser 100)

                      120° x 120° (Diffuser 120)

Batteries : 4xAA A: 6V Ni-MH: 4.8V

Number of Flashes *1 : A: 150 Ni-MH: 200

Recycle time (full) *2 : A: 3.0 sec. Ni-MH: 1.5 sec.

Color temperature : 5600K

Color temperature w/diffuser : 5250K

Depth rating : 100m / 330ft

Dimensions (WxHxD) (Excluding protruding part(s) and the arm holder): 89x133x116mm / 3.5 x 5.2 x 4.6 inches (incl. YS base but excluding protruding parts)

Weight : 623g / 22.0oz (w/o batteries) (inc. YS-mount and fixing bolt. Without batteries)

Underwater weight : Approx.+40g / 1.4oz (incl. batteries)

Exposure control : DS-TTL II, Slave TTL, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 32 (11 steps)

Pre-flash control : Equipped with pre-flash cancel mode

DS-TTL II function

Slave function

Auto power OFF function

Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable

Over-pressure relief valve LED target light (output is adjustable in 2 steps)

Audible charge signal

*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.

*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2400 mAh batteries.

Brand: Sea & SeaSea & Sea